Operations Dashboard Time Clocks: Clock In & Out

Introduction

Team members can declare Time Clock records via the Operations Dashboard. 

To clock in, clock out, or declare your break times:  

• Access the Operations Dashboard via your FOH device. 
• Select Time Clocks in the main menu.
• Enter your POS Code / Employee Number and select [OK].

The time clocks area is split into two sections each containing two buttons, where the only the relevant buttons are available to select based on current shift/break status:

• Record Time Clocks
  • Clock In
  • Clock Out
• Record Breaks
  • Start Break
  • End Break

Clock In

To clock in, within the Record Time Clocks section of the operations dashboard, select [CLOCK IN] 

Within the Clock In window, depending on your company configuration:

• POS Code / Employee Number: Enter your relevant team member code as prompted. 
• Job Role: If required, select the Job Role that you are working during the shift.

Then select [CLOCK IN]. 

You'll receive confirmation that the clock in time has been captured. 

Clock Out

To clock out, within the Record Time Clocks section of the operations dashboard, select [CLOCK OUT] 

You'll then be presented with information related to the shift, where applicable:

• Clock In Time: Displays the time that you clocked into the shift.
• Job Role: If applicable, displays the job role that you worked during your shift.
• Declare Cash Tips: If applicable, declare any cash tips received during your shift. (This prompt only shows if configured to do so for the company.)

To confirm clout out, select [CONFIRM CLOCK OUT].  

You'll receive confirmation that the clock out time has been captured. 

Start Break

To record that you are starting your break, within the Record Breaks section of the operations dashboard, select [START BREAK].

You'll receive confirmation that the break start time has been captured.

Note that you can only start a new break if you have an open shift. 

End Break

To record that you have ended your break, select [END BREAK].

You'll receive confirmation that the break end time has been captured.